SUBMARINEMUSEUMS.ORG Forum
General Boards => Museum Submarine Discussion => Topic started by: silversides on September 06, 2013, 09:38:02 AM
-
I need some parte for the purifier. My main need is a couple of belts, new or used. Any tools or parts will also help. Thanks. Frank Lydell
-
Frank,
Do you still have one of the "V" belts because if you do you can go to an auto parts store and have them match it with a new one. If not use a cloth tape measure and go aroud the pullies to get the length and spend some time at the auto parts store
Darrin
-
Derrin, Thanks for getting back to me. The belts are one inch flat canvas style driven by a convex pullly. I also need some mechanical parts for the drive pully system. Frank
-
Frank,
You had talked to Pat and I about a manual for the lube oil purifier pump. I think I found what you are looking for. I copied and scanned it and thought I'd post it here for others to look at if they wanted to. Quality is not the greatest, because the manual is in pretty rough shape. Hope this helps!
Karen
-
OK, My volunteer Pat found the correct manual. I don't know where, because I didn't see this one when I looked! This manual was in better condition so we scanned the full 50 page document. The document was too large to attach here so if anyone would like a copy I can always mail or email it.
The document is:
Instructions for Installation, Operation, & Maintenance of
450 G.P.H. Diesel Fuel Oil Purifier
250 G.P.H. Diesel Lubricating Oil Purifier
SS212 - SS227, SS240 - SS264
SS265 - SS274
SS228 - SS235, SS275 - SS280
SS236 - SS 239, SS281 - SS284
-
Thanks you and Pat i can go search fot the repair parts i neeed. Please mail it and i will cover the mailing cost. Again, thank you for the help. Frank
Frank Lydell
8020 Whispering Hills NE
Rockford Mi. 49341